Pump Jacks & PowerPole Systems

Werner 2324 Aluminum Stages - 24 Ft Long | 12" Wide 2-Person 500 lb Capacity The stage platfrom offer a 500 lbs duty rating and allows for 2 people on one plank. The TWIST-PROOF® design is ideal for ladder jack applications, swing stages or catwalks...

ReechCraft PowerPole 4022179 Platform Support with Connector The Platform Support is used for dual mast configurations and is installed with the PowerLatch Connector. With 11 in. of adjustment, the Platform Support is easily used with the PowerLatch...

Werner 2432 Aluminum Stages - 32 Ft Long | 14" Wide 2-Person 500 lb Capacity The stage platform offers a 500 lbs duty rating and allows for 2 people on one plank. The TWIST-PROOF® design is ideal for ladder jack applications, swing stages or catwalks...

Werner 2428 Aluminum Stages - 28 Ft Long | 14" Wide 2-Person 500 lb CapacityThe stage platform offers a 500 lbs duty rating and allows for 2 people on one plank. The TWIST-PROOF® design is ideal for ladder jack applications, swing stages or catwalks...

Werner 2424 Aluminum Stages - 24 Ft Long | 14" Wide 2-Person 500 lb Capacity The stage platform offers a 500 lbs duty rating and allows for 2 people on one plank. The TWIST-PROOF® design is ideal for ladder jack applications, swing stages or catwalks...

Werner Aluminum Nestable Stages - 2 Man / 500 lb. rated Ideal for use with Pump Jacks Individual slip-resistant decking minimizes paint or material build-up. Vinyl-coated end caps serve as hand grips and protect from sharp edges and surface marks...

ReechCraft "PowerPole" 4022084 - 12 ft. Pole Section A PowerPole setup can be constructed in any combination of 6 ft and 12 ft poles. Using 12 ft pole sections will decrease the number of couplers to bolt together, creating a lighter assembly...

ReechCraft "PowerPole" 4022435 - 6 ft. Pole Section A PowerPole setup can be constructed in any combination of 6 ft and 12 ft sections. Using 6 ft Pole sections allows for more compact transport and storage, but increases the number of couplers to...

ReechCraft "PowerPole" 4022096 - Pole Coupler A PowerPole setup can be constructed in any combination of 6 ft and 12 ft sections. Use this 4 ft Pole Coupler to connect the mast sections by fastening and securing 8 3/8 in. x 3/4 in. bolts...

ReechCraft "PowerPole" 4022465 - 10 in. x 10 in. Base Foot The 10 in. x 10 in. Base Foot attaches to the bottom of the base mast section. The belted rubber backing is durable and provides protection and solid footing during the setup process. The...

ReechCraft "PowerPole" 4022791 - PowerPort Outrigger Assembly The PowerPole Outrigger makes setup and moving around a job site easy. The rugged steel stabilizers keep you pressed into the wall, allowing a 24 ft work height without tying into the...

ReechCraft "PowerPole" 4022629 - Extendable V-Brace Kit This brace allows you to extend an additional 18 in. and move in 2 in. increments, creating a total wall distance of 51 in. when fully extended. This assembly also folds for easy storage and...

ReechCraft "PowerPole" 4022432 - Standoff Tie   The Standoff Tie accommodates most pitch roof lines. Standoff line including valleys. It also makes a stable wall tie that will safely secure the PowerPole System to different types of buildings...

ReechCraft "PowerPole" 4022178 - Super Standoff   The roof tie has extra long tubes to allow roof access. By placing the platform at roof level, the PowerPole Tilt-Up System can serve as roofline fall protection.   Features Versatile...

Alum-A-Pole | Aluminum Pump-Jack Poles and Joint Connectors Alum-A-Poles are made from a special structural aluminum that is permanently mated to a Saf-T-Grip rubber. Alum-A-Poles can be quickly spliced and used to a 50' maximum shoulder working...

 Alum-A-Pole | #ERNS-14 Pump Jack End Rail System (Each)  Features: Fits Stages up to 14" wide Attach this pair of end rails with net to the ends of your poll set-ups to help prevent workers from walking off the ends of scaffolds.  Easy...