Tapco Brake Accessories

This revolutionary tool can add value to your business by allowing you to deliver enhanced style and individuality to trim work. Use the Brake Buddy to produce brickmold trim and decorative ribs from trim coil in seconds. The measurement guide and...

Tapco 14978 Snap Stand Wheel Kit Optional wheel kit available for optimum portability of Tapco Snap Stand #11720 (Photo shown with Optional Wheel Set) Features: Two per kit Easy attachment Tough 10" pneumatic tires on steel hubs 10 lbs.  

The PRO Cut-Off lets you quickly and safely make factory-quality cuts right on your brake. Its single-pass cutting precision eliminates the use of dangerous utility knives and open blades, and the costly knifing damage they can cause to bending hinges...

Complete your portable brake and saw table systems with sturdy, solid support that sets up in seconds. Snap Stand legs adjust independently to level on uneven ground and fold flat for easy storage. Brakes and saw tables easily snap and lock into place...

Safety Hoist #BR-22000 | Brake Rack™ Get the brake rack that’s simple, safe, and affordable too Incredibly quick set up and take down are just two of the reasons to get your own Safety Hoist™ Brake Rack. The Quick Start Brake Rack is...

The Side-Winder secures coil right onto your TapCo brake system and feeds directly into the jaws of your brake. The result is greater efficiency and no more windblown, dirty, damaged coils. Attaches in seconds to PRO 19 or PRO 14 brakes (not including...

Tapco 11663 Angle Gauge The Tapco Angle Gauge adds uniform precision and takes the guess work out of your bends. Mounts easily on any PRO, MX Series, or MAX-I-MUM II brake Quickly shows the bending angle with bold, easy-to-read numbers  

Light duty leg set for use on "Windy" Siding Brake Tubular steel construction 30" high, folds compactly for storage and transport.

Light Duty leg set for use on the PRO-III Bender Tubular steel construction 30" high Folds compactly DOES NOT WORK WITH PRO 19

Tapco 10667 Port-O-Slitter Cut Off The Tapco 10667 Slitter Cut-Off produced professional straight square cuts while reducing scrap by eliminating knifing damages to costly bending hinges. Slitter Cut-Off promotes safety by reducing the usage of dangerous...

Tapco 10667 Port-O-Slitter Cut Off This is a sturdy molded plastic case for the Tapco Pro Cut-Off. It provides easy, safe, and durable transportation of your Pro Cut-Off from job to job. Sturdy molded plastic case Lightweight case for easy carrying of...

Tapco 11678 Brake Buddy Case  This product is a molded plastic storage case fit to give you safe and secure transportation of your Tapco "Brake Buddy".  Case only Keep your Brake Buddy protected    

Tapco 12250 Pro Cut-Off Gauge Quickly and safely make factory-quality cuts right on your brake. The PRO Cut-Off Gauge provides single-pass cutting precision, eliminating the need for dangerous utility knives and open blades, as well as the costly knifing...

Tapco 12282 MaxTrax Saw Table The MAXTrax Saw Table is the first specifically designed to tackle oversized shake and shingle panels or 16″ soffits. The saw will cut multiple angles from 3/12 to 12/12 — even on 16″ materials — and...

Tapco 12357 Port-O-Slitter Snap Stand The Tapco 12357 - 24in. Slitter Snap Stand is a versatile and durable tool that works in conjunction with the 24in. Port-O-Slitter. The legs are adjustable for all ground conditions and are constructed of durable...

Lightweight and easy to use, the PRO Coiler secures trim coil onto the Windy SP Port-O-Brake or Port-O-Slitter with Snap Stand to eliminate windblown, dirty or damaged coils. Attaches in seconds and allows rapid coil changes. Perforating rolls are sold...