Malco Siding Tools

Malco Tool MSH516P Hex Chuck Driver, 5/16”

Malco Tool #TNP3S Trim Nail Punch, Small The TNP3S, Pocket Sized Trim Nail Punch, is constructed of hardened steel and corrosion resistance to ensure longer tool life. The tool will hold and install standard 1-1/4” (31.2 mm) trim nails. The small...

Malco Tool #SRT2 Removal Tool, Vinyl Siding   The Malco SideSwiper II Vinyl Siding Removal Tool combines the comfort and added leverage of an easy-to-grasp straight handle with the smooth unlocking motion of a burr free hook. The blade of the...

Malco Tool #MV12 Snip, Vinyl, 12"   Cut through heavy vinyl siding lock-seams and more with ease. The MV12 Aluminum Handled Snip is part of the legendary ANDY SNIP line of “lightweight snips with the strength of steel”. This unique Andy...

Malco Tool HEX DRIVER, 5/16" AND 3/8", CLEANABLE

Malco Tool #GOT Gutter Outlet Tool (Tool Only)  The Malco Gutter Outlet Punch and Dies make clean, accurate hole cuts in .032” (0.81 mm) aluminum gutter. Ample throat clearance allows these lightweight outlet punches to work over the front...

Malco Tool MC12NG Aluminum Snip, Gripped, 12"   Malco’s 12″ Gripped Andy Snip’s features the same design and cutting power of other Andy Snip models but with added handle comfort. Grips add better comfort, fit, and control over...

Malco Tool #JCCR J Channel Cutter, 5/8"   Use Malco’s versatile J-Channel Cutters to make drain tabs, downstream notch cutouts, and miter trim cuts in vinyl channel. Available in three sizes for 1/2 inch (12.7 mm) channel using model JCC50R,...

Malco Tool #NHP1R Nail Hole Punch, Vinyl   The NHP1R Punch makes a generous 5/32 x 3/4 in. (4.0 x 19.1 mm) horizontal slot for adding or elongating nail holes in vinyl and .019 in. (0.48 mm) aluminum siding to accommodate irregular stud spacing...

Malco Tool #SL8R Snap Lock Punch, Vinyl   The SL8R Snap Lock Punch for Vinyl Siding produces wider, more prominent rectangular tab projections for securing vinyl skirting or siding to finishing trim. The raised tabs grip a greater surface area and...

Malco Tool M2006 Max 2000, Left Offset Cut  Malco’s original Max2000 features Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrower handle opening to fit large or small hands...

Malco Tool ER3 Edge Roller  The ER3 3-Station Edge Roller ensures a uniform bend along the entire length of material. The tool quickly adjusts for making 5/8” to 4” (15.9-102 mm) bends in 29-22 gauge (0.36-0.76 mm) steel. The center...

Malco Tool SL1R Snap Lock Punch, Metal   Malco’s SL1R Sheet Metal Snap Lock Punch raises a louvered shaped projection on metal edges for quickly locking metal pieces securely together. Punch impressions are spaced 3/8 in. from the metals edge...

Malco Tool #AV3 Aviation Snips, Combo Cut   Get a better grip with Malco’s AV Aviation Snips!    Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure...

Malco Tool TSA1RB Replacement Blades, Tsa2

Malco Tool #AV6 Aviation Snips, Left/Offset   Get a better grip with Malco’s Offset AV Aviation Snips!   Malco Offset AV Aviation Snips feature grooved non-slip POWER-FIT™ performance hand grips. These enhanced grips naturally...