System One Truck & Van Equipment

System One - A100 | Sliding Cargo Anchor w/ Knob The Sliding Cargo Anchor is an extremely versatile anchor point which can be positioned anywhere in any T-slot on the rack. They are cast from 413F aluminum alloy and are 4" long overall with a smooth 1"...

System One - A106 | 5" Ladder Stop/Anchor w/ Knob Ladder Side Stops are used as guides for ladders, lumber, pipes, etc. The Ladder Side Stop/Anchor version includes a hole for tying off ropes, etc. 1/4" x 1" aluminum.  

System One - A107 | Inside Hook/Anchor This hook and anchor is handy for small coils of rope or cord. The anchor portion is perfect for holding the hook end of a Work Winch strap or ratchet tie-down strap when rack is empty. They are 4 1/2" tall, made...

System One - A109 | Tall Side Stop, 13" The Tall Side Stop is a heavy duty stop made from 1/4" x 2" aluminum and vinyl coated. It is designed for those occasions when ladders or lumber exceed the height of the extension beam. It is 13" tall, and mounts...

System One - A111 | Hooked Bracket, 5" Hooked Brackets are very heavy hooks made from 1/4" x 2" aluminum and vinyl coated. These hooks come in three depths: 6 1/2", 5" and 2 1/2" and have a throat of 3 1/2". The 5" hook is the most popular size and can...

System One - A114 | Crossmember J Hook 5" This is a very useful hook because it takes advantage of a space that is not often utilized. The Crossmember J Hook mounts to the T-slot on the underside of the crossmember and it can be installed even with...

System One - A121 | Tool Box Hanger Top Side (1-Pair) This hanger is made from 1/4" x 1" aluminum and bolts into the heavy T-slot in the ITS gusset and into the end panel of a top-side (shown) or low-side tool box, eliminating the need for legs...

System One - A141 | Quick Hook, Standard The Quick Hook conveniently clips into the Pick-Up Trak anywhere along its length. These hooks are great at keeping 5 gal. buckets like spackle and roof coating from sliding around or to hold small amounts of...

System One - A142 | Quick Shelf Bracket (pair) Quick Shelf Brackets create an additional level for materials and help keep the cargo area organized. They clip into the vertical T-slot of the Pick-up Trak in seconds and are held in place by the 2" x 6"...

System One - A145 | Quick Spool & Reel Holder The Quick Spool & Reel Holder clips into the vertical T-slot in the Pick-up Trak. They set up in seconds and utilize a 1" pipe (not supplied) as a mandrel between them. The pipe sits in the U portion...

System One - A310 | Ladder Roller & Clamp The Ladder Roller and Clamp System provides near effortless loading, unloading, and fastening of a single ladder. The ladder rolls forward into front hold-down and is clamped in rear with one motion. Typical...

System One - A316 | Folding Foot Step, S.S. Bolts to truck body for better roof access. Stainless steel step folds up and stays up when not in use. 

System One - A320 | Strobe/Ant. Center Mount 6" Tall This strobe mount is 6" tall and protects strobe lights and antennas from damage by ladders and cargo. The top surface is 7" x 7" with a 3/4" center hole and 3 oblong holes 120° apart for strobe...

System One - A351 | Ratchet Tie-Down w/4' strap These are miniature versions of the large over-the-road ratchet tie-downs that are commonly used on flat bed trailers. They do have one important difference. With these ratchet tie-downs, the ratchet body...

System One - A352 | Ratchet Tie Down w/6' strap These are miniature versions of the large over-the-road ratchet tie-downs that are commonly used on flat bed trailers. They do have one important difference. With these ratchet tie-downs, the ratchet body...

System One - Contractor Rig® for Utility Body Trucks | All 11' Bodies with Standard or Extended Cabs (uses 174" Extension Beams) System One® makes racks in various lengths and heights for service/utility body trucks and they are offered in...

System One - Contractor Rig® for Utility Body Trucks | All 8' Bodies with Extended Cabs (uses 96” Trak and 156” Extension Beams) System One® makes racks in various lengths and heights for service/utility body trucks and they are...

System One - Contractor Rig® for Utility Body Trucks | All 8' Bodies with Standard Cabs (uses 96" Trak and 138" Extension Beams) System One® makes racks in various lengths and heights for service/utility body trucks and they are offered in...

System One - Contractor Rig® for Utility Body Trucks | All 9' Bodies with Extended Cabs (uses 106.75" Trak and 156" Extension Beams) System One® makes racks in various lengths and heights for service/utility body trucks and they are offered...

System One - Contractor Rig® for Utility Body Trucks | All 9' Bodies with Standard Cabs (uses 106.75” Trak and 147” Extension Beams) System One® makes racks in various lengths and heights for service/utility body trucks and they...