ReechCraft PowerPole System

ReechCraft "PowerPole" 4022800 - Climbing Unit The PowerPole Climbing Unit enables the climbing capabilities of the PowerPole System. Powered by a 1/2 in. drill, the 650 lb load-rated PowerTrak system offers extreme performance in a compact package,...

ReechCraft PowerPole 4022179 Platform Support with Connector The Platform Support is used for dual mast configurations and is installed with the PowerLatch Connector. With 11 in. of adjustment, the Platform Support is easily used with the PowerLatch...

ReechCraft "PowerPole" 4022772 - Platform Support Assembly The Platform Support is used for dual mast configurations. With 11 in. of adjustment, this support accommodates a wide range of standard work platforms from 12 in. to 24 in.   Features 12...

ReechCraft "PowerPole" 4027708 Single-sided PowerLatch Assembly Upgrade the PowerPole climbing unit with this quick latch system. Quickly reconfigure the PowerPole for a variety of jobs by connecting platform and workbench supports or a single...

ReechCraft "PowerPole" 4022771 Double-sided PowerLatch Assembly Upgrade the PowerPole Climbing Unit with this quick latch system. Quickly reconfigure the PowerPole for a variety of jobs by connecting or moving platform supports, a man basket or...

ReechCraft "PowerPole" 4022084 - 12 ft. Pole Section A PowerPole setup can be constructed in any combination of 6 ft and 12 ft poles. Using 12 ft pole sections will decrease the number of couplers to bolt together, creating a lighter assembly.  ...

ReechCraft "PowerPole" 4022435 - 6 ft. Pole Section A PowerPole setup can be constructed in any combination of 6 ft and 12 ft sections. Using 6 ft Pole sections allows for more compact transport and storage, but increases the number of couplers to...

ReechCraft "PowerPole" 4022096 - Pole Coupler A PowerPole setup can be constructed in any combination of 6 ft and 12 ft sections. Use this 4 ft Pole Coupler to connect the mast sections by fastening and securing 8 3/8 in. x 3/4 in. bolts.  ...

ReechCraft "PowerPole" 4022465 - 10 in. x 10 in. Base Foot The 10 in. x 10 in. Base Foot attaches to the bottom of the base mast section. The belted rubber backing is durable and provides protection and solid footing during the setup process. The...

ReechCraft "PowerPole" 4022791 - PowerPort Outrigger Assembly The PowerPole Outrigger makes setup and moving around a job site easy. The rugged steel stabilizers keep you pressed into the wall, allowing a 24 ft work height without tying into the...

ReechCraft "PowerPole" 4022754 - V-Brace The V-Brace tie is used in conjunction with the outrigger base, providing a stable rest for the top of the poles. This tie is light and easy to slide up and down the pole, even while attached to the system...

ReechCraft "PowerPole" 4022629 - Extendable V-Brace Kit This brace allows you to extend an additional 18 in. and move in 2 in. increments, creating a total wall distance of 51 in. when fully extended. This assembly also folds for easy storage and...