Siding Brakes

Light duty leg set for use on "Windy" Siding Brake Tubular steel construction 30" high, folds compactly for storage and transport.

Tapco 10667 Port-O-Slitter Cut Off The Tapco 10667 Slitter Cut-Off produced professional straight square cuts while reducing scrap by eliminating knifing damages to costly bending hinges. Slitter Cut-Off promotes safety by reducing the usage of...

Tapco 12282 MaxTrax Saw Table The MAXTrax Saw Table is the first specifically designed to tackle oversized shake and shingle panels or 16″ soffits. The saw will cut multiple angles from 3/12 to 12/12 — even on 16″ materials —...

The solution for heavy-duty commercial bending power, the MX Series commercial bending system includes an MX Series brake, MX Stand and Adjustable MAX Cut-Off. Stability and toughness are built into the MX Series brake, with double-walled pivot arms...

QuickScoreQuickscore scores material along the outer edge of the brake allowing downward separation and as you lift the piece up, it snaps right off into your hands where you need it. Tool uses standard utility blades (1 included in tool). The...

Alum-A-Brake – "QCoil" Coil Holder System for Ultima Series Aluminum Brakes Built in track mounted Q-Cutter. Keeps coil secure – no unraveling.Mounts in seconds to Alum-A-Brake Table or to Alum-A-Legs. Coil holders...

Malco Tool #NHP1R Nail Hole Punch, Vinyl   The NHP1R Punch makes a generous 5/32 x 3/4 in. (4.0 x 19.1 mm) horizontal slot for adding or elongating nail holes in vinyl and .019 in. (0.48 mm) aluminum siding to accommodate irregular stud spacing...

Easily snaps up nails and other debris from 2" below the base... works on almost any type of worksite, including concrete, grass, gravel, etc. Model LR-11 holds up to 300 3/4" roofing nails and the LR-20 holds up to 500 nails. One year warranty! The L...

Malco Tool #SL8R Snap Lock Punch, Vinyl   The SL8R Snap Lock Punch for Vinyl Siding produces wider, more prominent rectangular tab projections for securing vinyl skirting or siding to finishing trim. The raised tabs grip a greater surface area and...

Standard Wheel KitEasy to install wheel kits provide excellent mobility over all types of job terrain. The Van Mark Wheel Kit can be quickly installed on any Van Mark Brake. The durable wheel kit will make it easier to move a bending brake around the...

Van Mark UniLeg I SupportsHardware & AccessoriesSupport legs for setting up Trim-A-Gutter independently using included UniMount Kit. UniMount Kit (included with tool), lets you mount Trim-A-Gutter on any Van Mark brake, or independently using...

Van Mark Model USA2 20" Throat Brakes UniStand USA1, fits all Van Mark brakes up to 14" throat and TAT50/TAT60 Saw Tables, while model USA2, fits Van Mark brakes with a 20" throat.

Alum-A-Brake – Ultima "QCS" Series Aluminum Brake | with QCut System Standard Bending Brake Equipped with QCut System Track Mounted Quick Cutter Cutter Guide Bar Quick Cutter Stop 2 Bending Handles Alum-A-Pole Corporation, the...

Easily snaps up nails and other debris from 2" below the base... works on almost any type of worksite, including concrete, grass, gravel, etc. Model LR-11 holds up to 300 3/4" roofing nails and the LR-20 holds up to 500 nails. One year warranty! The L...

Malco Tool SL1R Snap Lock Punch, Metal   Malco’s SL1R Sheet Metal Snap Lock Punch raises a louvered shaped projection on metal edges for quickly locking metal pieces securely together. Punch impressions are spaced 3/8 in. from the metals edge...

Tapco 12357 Port-O-Slitter Snap Stand The Tapco 12357 - 24in. Slitter Snap Stand is a versatile and durable tool that works in conjunction with the 24in. Port-O-Slitter. The legs are adjustable for all ground conditions and are constructed of...

Malco FCFG Fiber Cement Siding Gauges: Overlap The Malco FCG2 Overlap Gauge works with 5/16 inches (7.9 mm) fiber cement siding. This tool permits one person application of panels. The two gauges that are included, support entire length of a panel and...

Malco Tool #AV3 Aviation Snips, Combo Cut   Get a better grip with Malco’s AV Aviation Snips!    Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure...

Malco Tool CG20 Professional Square Piston Design Caulking Gun Heavy duty professional models with thumb-activated pressure release. Designed for use with spouted cartridge. Powerful ratcheting action minimizes worker fatigue or need to warm up caulk...

Malco Tool ER3 Edge Roller  The ER3 3-Station Edge Roller ensures a uniform bend along the entire length of material. The tool quickly adjusts for making 5/8” to 4” (15.9-102 mm) bends in 29-22 gauge (0.36-0.76 mm) steel. The center...