Build your PowerPole System

ReechCraft PowerPole 4022179 Platform Support with Connector The Platform Support is used for dual mast configurations and is installed with the PowerLatch Connector. With 11 in. of adjustment, the Platform Support is easily used with the PowerLatch...

ReechCraft "PowerPole" 4022084 - 12 ft. Pole Section A PowerPole setup can be constructed in any combination of 6 ft and 12 ft poles. Using 12 ft pole sections will decrease the number of couplers to bolt together, creating a lighter assembly...

ReechCraft "PowerPole" 4022435 - 6 ft. Pole Section A PowerPole setup can be constructed in any combination of 6 ft and 12 ft sections. Using 6 ft Pole sections allows for more compact transport and storage, but increases the number of couplers to...

ReechCraft "PowerPole" 4022096 - Pole Coupler A PowerPole setup can be constructed in any combination of 6 ft and 12 ft sections. Use this 4 ft Pole Coupler to connect the mast sections by fastening and securing 8 3/8 in. x 3/4 in. bolts...

ReechCraft "PowerPole" 4022465 - 10 in. x 10 in. Base Foot The 10 in. x 10 in. Base Foot attaches to the bottom of the base mast section. The belted rubber backing is durable and provides protection and solid footing during the setup process. The...

ReechCraft "PowerPole" 4022791 - PowerPort Outrigger Assembly The PowerPole Outrigger makes setup and moving around a job site easy. The rugged steel stabilizers keep you pressed into the wall, allowing a 24 ft work height without tying into the...

ReechCraft "PowerPole" 4022629 - Extendable V-Brace Kit This brace allows you to extend an additional 18 in. and move in 2 in. increments, creating a total wall distance of 51 in. when fully extended. This assembly also folds for easy storage and...

ReechCraft "PowerPole" 4022432 - Standoff Tie   The Standoff Tie accommodates most pitch roof lines. Standoff line including valleys. It also makes a stable wall tie that will safely secure the PowerPole System to different types of buildings...

ReechCraft "PowerPole" 4022178 - Super Standoff   The roof tie has extra long tubes to allow roof access. By placing the platform at roof level, the PowerPole Tilt-Up System can serve as roofline fall protection.   Features Versatile...

ReechCraft "PowerPole" 4022071 - SpeedRail Endrail (2-pack) The endrails fasten to the Climbing Unit with the PowerLatch.   Features No-Tools Connection Works with Any Stage (PowerPole Configuration) Box...

ReechCraft "PowerPole" 4022785 - SpeedRail Midrail Posts (2-pack) The midrails attach to the workbench and mount to the walkboard securely with a chain. The posts are placed 8 ft apart or less. Wooden 2×4’s are then mounted to the...

ReechCraft "PowerPole" 4022756 - Single Man Basket for use on the PowerPole System Description:The PowerPole with Basket attachment is truly a product of its own. When used with the PowerPole Outrigger attachment, you can set up a single mast in a...