Malco - Crimpers, Punches & Seamers

Malco Tool #JCCR J Channel Cutter, 5/8"   Use Malco’s versatile J-Channel Cutters to make drain tabs, downstream notch cutouts, and miter trim cuts in vinyl channel. Available in three sizes for 1/2 inch (12.7 mm) channel using model JCC50R,...

Malco Tool #NHP1R Nail Hole Punch, Vinyl   The NHP1R Punch makes a generous 5/32 x 3/4 in. (4.0 x 19.1 mm) horizontal slot for adding or elongating nail holes in vinyl and .019 in. (0.48 mm) aluminum siding to accommodate irregular stud spacing...

Malco Tool #SL8R Snap Lock Punch, Vinyl   The SL8R Snap Lock Punch for Vinyl Siding produces wider, more prominent rectangular tab projections for securing vinyl skirting or siding to finishing trim. The raised tabs grip a greater surface area and...

Malco Tool SL1R Snap Lock Punch, Metal   Malco’s SL1R Sheet Metal Snap Lock Punch raises a louvered shaped projection on metal edges for quickly locking metal pieces securely together. Punch impressions are spaced 3/8 in. from the metals edge...

Malco Tool #S9R Seamer, Hand, 9"  Malco Hand Seamers, with die cast zinc jaws, are gentle on painted or coated metal surfaces. These seamers are ideal for making clean and accurate bends and seams in aluminum roof flashing, coil stock or fascia. The...

Malco Tool MSH516P Hex Chuck Driver, 5/16”

Malco Tool MSH516P Hex Chuck Driver, 5/16”

Malco Tool SL2R Snap Lock Punch, Mtl, Adjustable   The Malco model SL2R Adjustable Snap Lock Punch can be used as a gutter end cap crimper or for use in creating locking tabs in light sheet metals. A slide adjustment for throat depth allows settings...

Malco Tool #C4R Crimper, Downspout, 5 Bld   If you are looking for a tool that efficiently downsizes the corners of aluminum or steel downspout, then the Malco 5 Blade Gutter Downspout Crimper is the tool you are looking for. The 5 blade design...

Malco Tool C5R 5-Blade Sheet Metal Crimper Equip yourself with only the best during HVAC installation with the C5R Malco 5 Blade Sheet Metal Crimper. The C5R creates long, shallow double crimps that replicates factory indentations. These longer shallower...

Malco Tool CGP18 Ceiling Grid Punch replacement This is a replacement Grid Punch for Malco's CBPR Ceiling Grid Punch Tool

Malco Tool CGPR Ceiling Grid Punch Malco’s Ceiling Grid Punch makes clean 1/8 inch (3.2 mm) holes in up to three layers of 25 gauge (0.53 mm) ceiling grid. The tool’s slim, but strong, “C” shaped steel frame ensures lightweight,...

Malco Tool FSHS Standing Seam Hand Seamer, 1-1.5″ Designed for seaming both the first (90°) stage and second (180°) stage locks of a mechanical seam, the FSHS is Malco’s recommended seamer for closing 1″ or 1.5″...

Malco Tool FSHS2 Standing Seam Hand Seamer, 2″ Designed for seaming both the first (90°) stage and second (180°) stage locks of a mechanical seam, the FSHS2 is Malco’s recommended seamer for closing 2″ mechanical lock panels by...

Malco Tool FSXC Standing Seam Cutter, 1.5 Inch Malco’s power assisted cutter is the fastest cutting machine in the market, making it the perfect hand-held equipment for effortless removal of  1″ or 1.5″ single and/or double...

Malco Tool FSXC2 Power Assisted Metal Cutter, 2″ Malco’s power-assisted cutters are the fastest cutting machines on the market, making them the perfect hand-held equipment for effortless removal of 1.5 inch or 2 inch single and/or double...

Malco Tool FSXS Standing Seam Seamer, 1.5" Malco’s power assisted seamer is the fastest seaming machine in the market, making it the perfect hand-held equipment for effortless seaming of 1″ or 1.5″ single and/or double mechanical lock...

Malco Tool FSXS2 Power Assisted Metal Seamer, 2″ Malco’s power-assisted seamers are the fastest seaming machines on the market, making them the perfect hand-held equipment for effortless seaming. Similar to the FSXS, the FSXS2 is used to...

Malco Tool S10 Cast Steel Seamer & Tongs The Malco Seamer & Tongs line features generous throat depths and openings to handle a broad range of bending and seaming applications. Durable all-cast-steel construction with heavy-duty pivot point...

Malco Tool S11 Cast Steel Seamer & Tongs The Malco Seamer & Tongs line features generous throat depths and openings to handle a broad range of bending and seaming applications. Durable all-cast-steel construction with heavy-duty pivot point...