
PRO 14 Siding Brake #PRO14
- SKU:
- PRO14
- Brand
- Tapco
- Weight:
- 87.00 LBS
- Select Option below to see Price:
- »
Customers Also Viewed
PRO 19 Siding Brake
Tapco's exclusive Unilink technology! Never adjust your brake again. 19" (48,3 cm) throat depth largest in the industry for more efficient bending. Stores material inside bender reduces handling and...
Alum-A-Pole | Model BKB Ultima 10'6" Siding Brake & Accessories
Alum-A-Pole | Model BKB Ultima 10'6" Brake Siding Table Ultima Plus – Our new kwik release table design permits Alum-A-Pole to offer the best brake…at the lowest...
Werner 2300 Series Aluminum Stages - 12" Wide 2-Person 500 lb Capacity
Werner Aluminum Stages - 12" Wide 2-Person 500 lb Capacity The stage platfrom offer a 500 lbs duty rating and allows for 2 people on one plank. The TWIST-PROOF® design is ideal for ladder jack...
Werner 2000 Series Aluminum Stages - 12" Wide 1-Person 250 lb Capacity
Werner Aluminum Stages (Decorator Plank) Aluminum decorator plank is twist proof and designed for one person use with a 250 pound load rating. Slip-resistant decking minimizes paint or material...
Van Mark - Mark I Series Siding Brake
Mark I Series Siding Brake: NO FRILLS OR GIMMICKS, JUST GOOD CRAFTSMANSHIP & DEPENDABILITY!Van Mark Products, known throughout the industry for the superior quality of its products and customer...
Werner D6200-2 Series Fiberglass Extension Ladder 300 lb Rated
The D6200-2 Fiberglass Extension Ladders have non-conductive rails making these ladders ideal for working near electricity. With a duty rating of 300 lbs, the D6200-2 series is durable and long...
Werner D1500-2 Series Extension Ladder 300 lb rated
The D1500-2 Series Aluminum Extension Ladders have a duty rating of 300 lbs and have extra heavy duty I-beam side rails. The base and fly sections separate easily and can be used separately. Guide...
Van Mark - Mark II Contractor Siding Brake
Mark II Series Siding Brake: Building upon the reputation of the Mark I Series, the Mark II TrimMaster arrives with leading technologies such as the Power Lock bar & POWERslot technology for...
Windy SP Port-O-Brake
Locking system design provides more clamping power with less effort.Locks on a wider variety of material thicknesses with no need for adjustments. Full 14" throat depth. Stainless steel bending edge...
Alum-A-Pole | Aluminum Pump-Jack Poles and Joint Connectors
Alum-A-Pole | Aluminum Pump-Jack Poles and Joint Connectors Alum-A-Poles are made from a special structural aluminum that is permanently mated to a Saf-T-Grip rubber. Alum-A-Poles can be quickly...
Werner 6200 Series Stepladder 300 lb rated
The Werner 6200 Series Stepladders are design for professional contractors and industrial users. With a duty rating of 300 pounds, this series features a HolsterTop with the Lock-In System to secure...
Werner Aluminum Ladder Jacks
The AC10-14-02 Two Rung Short Body Ladder Jack is designed for quick field adjustments. The PLATFORM CLAMP SYSTEM Clamp secures the platform to the ladder jacks and ties supporting ladders together...
Description
Tapco's exclusive Unilink technology! Never adjust your brake again. 14" (35,6 cm) throat depth with patented large inside working pockets and a 2 3/8" (6 cm) mouth opening. Lightweight, high tech anodized alloys and computer designed die castings for strong long lasting service.
Patented Positive Toggle Locking System the Timesaver pro 14 is the only portable sheet metal bender that does it all. The revolutionary new Unilink technology means you never adjust in brake jaws and insures a longer brake life. Features include: makes 180 degree bends fast and easy, full 14" throat depth for use with 28" coil, built-in work table, built-in depth gauges with tape measure speeds up bending, dual working pocket so shapes can be made up or down, built-in tape measure right along the front edge where you need it, and a removable carrying/lifting handle. The positive toggle locking system features quick positive clamping, infinitely adjustable, no springs to wear out, and the strongest locking system in the industry. This I bender is capable of bending up to .030 soft aluminum, .020 hard aluminum, and 28 gauge galvanized steel.
Features:
- Available Lengths: 8' 6", 10' 6", 12' 6" Heavy Duty, 12' 6"
- Weight: 8' 6" brake 87 lbs; 10' 6" brake 106 lbs; 10' 6" heavy duty brake 127 lbs; 12' 6" brake 129 lbs.
- Throat Depth: 14"
- Mouth Opening: 2-3/8"
Bending Capacities:
- All vinyl
- Soft aluminum up to .030
- Galvanized steel up to 28 ga
- Copper sheet and coil up to 16 oz.
Additional Info
0 Reviews
Shipping & Returns
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.